Supply – Install – Service – Cooling – Heating

Inverter Ducted Systems

Through new, advanced technology, the Inverter Ducted Systems are more economical to operate and quieter to run than conventional units. They can handle greater extremes in temperature, are smoother and more stable in operation and reach the desired temperature more quickly than conventional air conditioners.

The Inverter component allows the outdoor unit to vary its speed and output to match the required capacity of the indoor unit. Thus, the Inverter model can achieve 30% more operating efficiency than conventional models and therefore, is much cheaper to run.

Zoning:

A ducted system is zoned to enable the user to select the area of the home or office that is to be air conditioned.

A typical layout may be:
Zone 1: Bedrooms
Zone 2: Kitchen and Family Room
Zone 3: Dining and Living Room

Features:

  • Concealed Installation
  • Perfect comfort throughout every room
  • Reverse cycle heating & cooling
  • A selection of outlets to choose from
  • Wall Controller

Ducted Gas Heating

A ducted system to heat multiple areas – usually the most inexpensive way to heat a whole house in terms of both installation and running costs. There are different sized systems for different size houses.

There has recently been an improvement in the efficiency of ducted heaters. Each unit has a Star Rating as an indication of its efficiency – they range from 3 star (standard efficiency), to   4 star (Mid efficiency) up to  5 and 5 ½ Stars (High efficiency).

For larger homes Zoning is recommended to further reduce running costs. Certain areas (zones) of the house can be turned off – i.e. bedrooms off through the day or formal living areas independent of other zones.

We install a range of different brands and are able to install the heater either in the ceiling or under the floor, if there is adequate clearance. A ducted heater can have a timer controller to allow you to set the system to turn on and off at different times.

Best for

  • Entire House in heating & cooling
  • Visually less intrusive
  • Refreshing
  • Wall/Window

Flexibility

Daikin Ducted Air Conditioner is very flexible; it allows giving heat or cooling into the entire home. Energy efficiency and you can make your air conditioners operation suit to your lifestyle.

MEPS Compliant

All Daikin ducted air conditioners exceed MEPS (Minimum Energy Performance Standards) requirements.  This confirms Daikin’s commitment to providing energy efficient, quiet and reliable air conditioning solutions.

Daikin Exceeds MEPS Energy Efficiency Requirements:

In the interests of increasing the overall air conditioner efficiency, all ducted air conditioners with a cooling capacity of up to 65kW sold in Australia must now comply with the Minimum Energy Performance Standards (MEPS), as set out in Australian Standard 3823.2:2013. All Daikin air conditioners exceed MEPS requirements, in line with Daikin’s commitment to providing energy efficient, quiet, simple to use and reliable air conditioning solutions.

Inverter Technology

Daikin Ducted Air conditioning has advance technology which allows the inverter based system to continually adjust its cooling and heating output in base on the room temperature.  In reaching the desired cool or heat, inverter technology does maintain it consistently – that’s provides and run efficiently and at the same time keeping you comfortable.

Compact Design

The entire ducted indoor items are designed and manufactured into our Sydney factory. It is made and design to any type of roof setting, It can be separated into two sections to make it light to carry and easier to measure through openings and in the ceilings.

Daikin Ducted Air Conditioners consist of an indoor and outdoor unit and flexible ducting. The indoor unit is concealed out of sight, in your ceiling or under the floor, with flexible ducting distributing conditioned air through vents located throughout your home. An outdoor unit is positioned in a discreet location outside your home. The system provides sensible conditioning to luxuries the entire home.

Human presence Sensor

This detects whether someone is actually in the room, so that the unit knows to keep working. Some models even direct the air movement towards the sensed person, so as to not use excess energy to cool other sections.

Remote control

Look for large, well-spaced buttons and a big, easy-to-read LCD screen.

Sleep mode

This function adjusts, in steps, the temperature to a comfortable level for sleeping so the air conditioner doesn’t work as hard (and more quietly) when you’re sleeping.

Adjustable or oscillating louvres

Point them up for cool air and down for warm. This can be done via the remote for most models. Left and right adjustability helps direct air where it’s particularly needed.

Restart delay

A protective feature that prevents the air conditioner from starting up again too soon after being switched off.

Wall/window: 

These models are usually installed in a window or external wall, and can cool rooms and open-plan areas of up to 50 square metres. Smaller units can be plugged into a normal power point; larger ones may require additional wiring.

Cool and Sound Reduction System

Daikin Ducted Air Conditioning Inverter technology was updated to the latest system to produce superior comfort levels with the lowest running costs.

  • Energy Smart Zoning reduces indoor sound levels as airflow is reduced.
  • Improved outdoor sound quality versus fixed speed technology.
  • Sound Reduction System (SRS)
  • Smart defrost function reduces cold drafts during start up in winter.
  • Easy to use 8-zone integrated touch pad
  • Slimline design to suit most interiors
  • Auto/Heat/Cool changeover
  • On board temperature sensor
  • 5ºC temperature increments
  • Precise temperature control
  • 3 speed fan and ESP mode
  • Fan only operation
  • 7 day programmable timer
  • 24 hour programmable timer
  • Filter clean reminder
  • Cool white backlight
  • Compatible with home automation for remote on/off control
  • Optional secondary temperature sensor
  • Optimal secondary controller with mimic logic

8-zone Controller

  • Easy to use 8-zone integrated touch pad
  • Slimline design to suit most interiors
  • Auto/Heat/Cool changeover
  • On board temperature sensor
  • 5ºC temperature increments
  • Precise temperature control
  • 3 speed fan and ESP mode
  • Fan only operation
  • 7 day programmable timer
  • 24 hour programmable timer
  • Filter clean reminder
  • Cool white backlight
  • Compatible with home automation for remote on/off control
  • Optional secondary temperature sensor
  • Optimal secondary controller with mimic logic